# pyCRTM installation cannot find crtm\_module.mod **URL:** \ **Category:** CRTM\ **Created:** [December 11, 2023, 7:33pm UTC](https://forums.jcsda.org/t/pycrtm-installation-cannot-find-crtm-module-mod/556 "2023-12-11T19:33:52Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Cas](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/cas/32/205_2.png) [@Cas](https://forums.jcsda.org/u/Cas)\ **Post date:** [December 11, 2023, 7:33pm UTC](https://forums.jcsda.org/t/pycrtm-installation-cannot-find-crtm-module-mod/556/1 "2023-12-11T19:33:52Z")
Hi, I was able to get CRTM successfully installed on my machine (after running “make check”, I get “Test Successful”), but I am running into some trouble when trying to install pyCRTM when following the JCSDA/pycrtm github. It says it cannot find the “crtm\_module.mod” file even though I’m able to locate it at both “~/crtm/crtm\_build/crtm\_v2.4.0-alpha/include/crtm\_module.mod” and “~/crtm/src/Build/libsrc/crtm\_module.mod”. I have changed the path in setup.cfg to both paths pointing to this file, but neither paths worked. Any suggestions would be great. ---
**Author:** ![BenjaminTJohnson](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/benjamintjohnson/32/19_2.png) [@BenjaminTJohnson](https://forums.jcsda.org/u/BenjaminTJohnson)\ **Post date:** [December 11, 2023, 7:52pm UTC](https://forums.jcsda.org/t/pycrtm-installation-cannot-find-crtm-module-mod/556/2 "2023-12-11T19:52:48Z")
Hi Cas, Try using the complete path (e.g., “/home/users/cas/CRTM/build/libsrc/” or whatever it is, rather than the “~” path in the setup.cfg, see if that works. -Ben ---
**Author:** ![Cas](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/cas/32/205_2.png) [@Cas](https://forums.jcsda.org/u/Cas)\ **Post date:** [December 11, 2023, 7:56pm UTC](https://forums.jcsda.org/t/pycrtm-installation-cannot-find-crtm-module-mod/556/3 "2023-12-11T19:56:18Z")
I tried it set to the full path without “~”, still receiving the same error