# Setting Surface Emissivity

**URL:** <https://forums.jcsda.org/t/setting-surface-emissivity/441>\
**Category:** CRTM\
**Created:** [March 17, 2023, 8:17pm UTC](https://forums.jcsda.org/t/setting-surface-emissivity/441 "2023-03-17T20:17:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JackD](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/jackd/32/218_2.png) [@JackD](https://forums.jcsda.org/u/JackD)\
**Post date:** [March 17, 2023, 8:17pm UTC](https://forums.jcsda.org/t/setting-surface-emissivity/441/1 "2023-03-17T20:17:36Z")

</div>

Good afternoon,  
I’m trying to set the surface emissivity to 1.0 instead of having the CRTM calculate it from one of the included surface options. In the included program check\_crtm.f90 I tried  
CALL CRTM\_Options\_SetEmissivity(opt, 1.0\_fp)  
But I get the error “There is no specific subroutine for the generic ‘crtm\_options\_setemissivity’”. Obviously I’m doing something wrong, but what is the correct way?

Jack

---

<div class="post-metadata">

**Author:** ![StegmannJCSDA](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/stegmannjcsda/32/53_2.png) [@StegmannJCSDA](https://forums.jcsda.org/u/StegmannJCSDA)\
**Post date:** [March 20, 2023, 6:09pm UTC](https://forums.jcsda.org/t/setting-surface-emissivity/441/2 "2023-03-20T18:09:04Z")

</div>

Hello @JackD. Following the CRTM User Guide, you can set a custom surface emissivity in the following way:

```plaintext
! Specify the use of user-defined emissivities...
opt%Use_Emissivity = .TRUE.
! ...defining different "grey-body" fixed emissivities for each profile 
opt(1)%Emissivity = 0.9525_fp
opt(2)%Emissivity = 0.8946_fp
additional profiles...

```

Note that the `opt` index is the corresponding atmospheric profile.

---

<div class="post-metadata">

**Author:** ![JackD](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.jcsda.org/jackd/32/218_2.png) [@JackD](https://forums.jcsda.org/u/JackD)\
**Post date:** [March 20, 2023, 10:24pm UTC](https://forums.jcsda.org/t/setting-surface-emissivity/441/3 "2023-03-20T22:24:49Z")

</div>

Thanks @StegmannJCSDA. My problem was that I’m using multiple sensors. Just below what you quoted from the User’s Guide is what to do in that instance. Oops, didn’t see that-sorry.

Jack
